A-3.5 Safety Devices - Genie GTH-3512 Operator's Manual

■ A-3.5 SAFETY DEVICES
• Moment limiting device. A load cell is placed on
the rear axle. The cab display with 8 LEDs (4 green,
2 yellow and 2 red ones) enables the operator to
check the stability variation of the machine.
• Emergency stop pushbutton: when pressed
down, it stops the engine and blocks the
movements of the machine.
Before starting work again, find and rectify the
relevant causes, then reset the button to neutral
position turning it clockwise.
Handler with telescopic boom GTH-3512
GENERAL INFORMATION
• Limit switch on the outriggers
When the outriggers are lowered to the ground, the
speed switch and the scale selector of the moment
limiting system are deactivated.
• Safety pushbutton on joystick (dead man button).
This button must be pressed and held down while
executing a function with the control lever. If the
button is released, the movement in progress will
be blocked.
A - 14
Page
Document 57.0008.7200 - 05/2007
Courtesy of Crane.Market