Disconnecting The Battery; Starting The Machine - Genie GTH-3512 Operator's Manual

■ C-4.4

DISCONNECTING THE BATTERY

During maintenance or repair works, and while welding,
turn off the battery main switch
engine compartment in the area of the rear wheel.
Handler with telescopic boom GTH-3512
OPERATING INSTRUCTIONS
■ C-4.5
When the engine reaches the running temperature,
, located outside the
ensure all parts are in transfer position and the gearbox
lever is in neutral. Then, proceed as follows:
•
•
•
•
Do not operate the forward/reverse gear lever when
the machine is running. The machine would reverse
the running direction abruptly and you could
seriously be injured.
C - 25
Page
Document 57.0008.7200 - 05/2007

STARTING THE MACHINE

Select the required steering mode.
Select the required gear (forward or reverse).
Release the parking brake.
Slowly step on the gas pedal to start moving off.
CAUTION
Courtesy of Crane.Market