Labels And Warning Plates Applied On The Machine - Genie GTH-3512 Operator's Manual

■ A-1.2 LABELS AND WARNING PLATES
APPLIED ON THE MACHINE
This paragraph lists the labels and warning plates
normally applied on standard machines or on special
attachments coupled to the machine.
IMPORTANT
The familiarisation with these labels is never a
waste of time.
Make sure they are easy to read. For this purpose,
clean them or replace those that become
unreadable (either graphic or text).
To clean labels, use a soft cloth, water and soap.
Never use solvents, petrol, etc.
When a label is applied on a part to be replaced,
make sure that the replaced part is already labelled
as required or apply a new label.
Handler with telescopic boom GTH-3512
GENERAL INFORMATION
Description:
Labels with transparent background giving a quick
overview of the main functions of the handler.
Meaning:
An overview of the operator's handbook concerning:
- control lever,
- machine starting,
- overload warning system
- main safety precautions,
and including the fork load charts with or without use
of the outriggers.
Location:
in the cab, on the windscreen, to the right of the driving
place.
A - 3
Page
Document 57.0008.7200 - 05/2007
Courtesy of Crane.Market