Every 3 working months
1
Check the efficiency of the block valves - see
chap. D-3.16
Every 500 working hours or every six months
Jobs to be done in addition to those above.
1
Visually check the smoke quantity evacuated from
the engine exhaust
2
Check the tightening of the engine fixing screws
3
Check the tightening of the cab fixing screws
4
Check the backlash between pins and bushings in
all joints
5
Change the hydraulic oil filter of the transmission
6
Change the hydraulic oil filter in the tank
7
Have the hydraulic system checked by a skilled
technician
8
Change the main cartridge of the engine air filter
9
Clean or replace, if nececessary, the air filter in the
cab
D-2.1
OIL CHANGE SCHEDULE
■
Job
Engine
Oil level check
First change
Subsequent changes
Axles and
Oil level check
power
First change
divider
Subsequent changes
Hydraulic
Oil level check
oil
First change
Subsequent changes
* whichever occurs first
Handler with telescopic boom GTH-3512
MAINTENANCE
Every 1000 working hours or yearly
Jobs to be done in addition to those above
1
Change the safety element of engine air filter
2
Change the oil in the front and rear differential units
and in the power divider
3
Change the oil in the four wheel reduction gears
4
Change the hydraulic oil
operating
service
hours*
interval*
10
daily
50
-
250
monthly
250
monthly
-
-
1000
yearly
10
daily
-
-
1000
yearly
D - 4
Page
Document 57.0008.7200 - 05/2007
Oil type
SHELL RIMULA 15W-40
(API CH-4/CG-4/CF-4/CF; ACEA E3;
MB228.3)
FUCHS TITAN GEAR LS 85 W-90
API GL-5 LS / GL-5
SHELL TELLUS T 46
DENISON HF-1, DIN 51524 part 2 and 3
Courtesy of Crane.Market