Extron electronics TLS 520M User Manual page 25

Communication Settings window
The
Communication Settings
provides a set of tools for managing the following internet settings of the connected panel:
¤ ¤ ¤ ¤ ¤ ¤ ¤ ¤ ¤ ¤
1 1 1 1 1 1 1 1 1 1
2 2 2 2 2 2 2 2 2 2
3 3 3 3 3 3 3 3 3 3
4 4 4 4 4 4 4 4 4 4
5 5 5 5 5 5 5 5 5 5
6 6 6 6 6 6 6 6 6 6
7 7 7 7 7 7 7 7 7 7
Figure 15. Device Management Window, Communications Settings
(displayed only)
1
MAC Address
2 IP Address
3 Subnet Mask
4
Hostname
When the checkbox (see figure 15,
DHCP
All other settings (other than DHCP itself) are displayed only and unavailable for editing. To
edit all settings (other than the
NOTE: If you configure the panels with a static IP address and you use a host name for
the exchange server, ensure that you provide the DNS server address.
The
Communication Settings
NOTE: All panels ship with the default, case-sensitive, password "
recommends that you change the password.
Change the password as follows:
1.
Click (select) the
Change Touch Panel Password
2. Enter the new password in the
Once you have made all desired changes available from the Communication Settings
tab, click either the OK button (
General Settings tab (
¤
next page).
Room Scheduling System • Room Agent Installation and Configuration
tab on the
Device Management
8 8 8 8 8 8 8 8 8 8
9 9 9 9 9 9 9 9 9 9
¢ ¢ ¢ ¢ ¢ ¢ ¢ ¢ ¢ ¢
5
Default Gateway
(Domain Name System) server
6 DNS
(Dynamic Host Configuration Protocol)
7 DHCP
) is selected, only the
7
), must be deselected (unchecked).
MAC address DHCP
tab also allows users to change the password of the panel.
checkbox (
( ) and
9
Password Confirm Password
, the
£ Device Management
, then general settings are displayed, see
window (see figure 15)
£ £ £ £ £ £ £ £ £ £
can be edited.
Hostname
". Extron
extron
).
8
( ) fields.
¢
window closes) or the
figure 16 on the
19