Extron electronics TLS 520M User Manual page 47

Assign or change a background image as follows:
NOTE: Room Agent software and the scheduling system support image files with
the following traits only:
•
JPEG or PNG format
• 800x480 resolution
• 8-bit color
1. Click the
Change Image
dialog box opens.
Open
2. Navigate to the folder where you saved the background image file. Select the file
(see figure 42,
1
3. Click ( ). The
Open 2
image is displayed in the preview pane (see
Overlay Opacity (see
4
and drag this fader control or type a value
directly in the field to set the opacity of any displayed background image.
Date & Time tab
If necessary, click the
Date & Time
time format.
1 1 1 1 1 1 1 1 1 1
2 2 2 2 2 2 2 2 2 2
3 3 3 3 3 3 3 3 3 3
4 4 4 4 4 4 4 4 4 4
6 6 6 6 6 6 6 6 6 6
5 5 5 5 5 5 5 5 5 5
7 7 7 7 7 7 7 7 7 7
Figure 43. Panel Design Pane, Date & Time Tab
Time Format, Time: drop-down list — Use this drop-down list to select among
2
( PM, for example),
12-Hour 1:30
(13.30).
Room Availability Format, Start time: drop-down list — Use this drop-down list to
3
select the start time of room availability display, in half-hour increments.
Room Availability Format, End time: drop-down list — Use this drop-down list to
4
select the end time of room availability display, in half-hour increments. The menu also
shows the quantity of time the room availability is displayed.
Date Format radio buttons — Use these radio buttons to select the format to display
5
on the panel. After you select either
down list (see and
6 7
Room Scheduling System • Room Agent Installation and Configuration
... button (see figure 41,
on the previous page).
dialog box closes and the newly assigned background
Open
figure
figure 41) —Click
tab (see figure 43,
1
(13:30),and
24-Hour US
or
Short date
on the next page) becomes available for selection.
on the previous page). The
3
41).
) to make changes to the date and
24-Hour International
, the associated drop-
Long date
41