Extron electronics TLS 520M User Manual page 26

General Settings window
The tab on the
General Settings
set of tools for managing display, time, and audio settings of the connected panel.
8 8 8 8 8 8 8 8 8 8
1 1 1 1 1 1 1 1 1 1
2 2 2 2 2 2 2 2 2 2
3 3 3 3 3 3 3 3 3 3
4 4 4 4 4 4 4 4 4 4
5 5 5 5 5 5 5 5 5 5
Figure 16. Device Management Window, General Settings
Display Brightness — Set the panel illumination brightness, from
1
using this fader control.
Display Sleep Mode — Toggle Sleep mode
2
radio button. If Sleep mode is
minutes.
Timezone — Use the drop-down list to select the appropriate time zone.
3
Synchronize Clock with — Toggle the clock synchronization source between the
4
and
Calendar server
synchronization between computer systems) by selecting the appropriate radio button.
NOTE: If you select
field ( ).
5
Server path: (available only if NTP is selected in
5
server.
Audio Volume — Set the panel audio volume, from
6
control.
Once you have made all desired changes available from the General Settings tab, click
either the OK button ( , the
7
Settings tab ( , then communication settings are displayed, see
8
previous page).
Room Scheduling System • Room Agent Installation and Configuration
Device Management
and
On
, use the
On Minutes
(Network Time Protocol — a networking protocol for clock
NTP
, specify the path to the NTP server in the
NTP
4
window closes) or the Communication
Device Management
window (see figure 16) provides a
6 6 6 6 6 6 6 6 6 6
7 7 7 7 7 7 7 7 7 7
to (percent)
0 100
by selecting the appropriate
Off
field to specify between and
1
Server path:
) — Specify a path for the NTP
to (percent) using this fader
0 100
figure 15 on the
99
20