Extron electronics TLS 520M User Manual page 23

3. Enter the IP address of the desired panel in the
(see figure 12, on the previous page).
1
4.
If the panel is password protected, enter the password in the
( ).
2
NOTE: All panels ship with the default, case-sensitive, password "
5. Click the Add button (
3
adds it to the
Manually Added Panels
NOTES:
• TLS scheduling panels ship with scheduling firmware installed. All except the
TLS 525M, TLS 725M, or TLS 1025M require firmware version 2.01.0010-b001
or higher to connect to them. TLS 525M, TLS 725M, or TLS 1025M requires
version 1.00.0004-b001.
• TLP Pro touchpanels ship with control firmware installed. Room Agent
requires that scheduling panels run different, scheduling, firmware, version
2.01.0010-b001 or higher to connect to them.
• For either family of panel models, if you receive the message
connect to this device
and update the panel firmware (see
at step 5).
Figure 13. Panel Management View with Panels Assigned
Room Scheduling System • Room Agent Installation and Configuration
IP Address/Hostname:
). Room Agent searches for the requested panel and, if found,
pane (see figure 13).
, click in the message dialog box, STOP HERE
OK
Update Firmware
field
field
Password:
".
extron
Cannot
on page 46, beginning
17