Smoke Number; Differential Pressure - TESTO Next-Gen 300 Instruction Manual

9 Performing the measurement

Smoke number

9.5.5
Smoke No.
The
fuels. The values calculated by a smoke tester can be entered.
Edit values
All values that can be modified have a dotted underlining.
1
Call up function:
2
Tap required value.

Keypad appears.
3
Enter value.
Confirm entry: tap ✓.
4
5
Reset readings: tap

Differential pressure

9.5.6
For this type of measurement, the
See Averaging section.
The differential pressure measurement can also be performed using the
Smart Probe testo 510i (0560 1510).
Up to 4 testo 510i Smart Probes can be connected.
Dangerous mixture of gases!
Danger of explosion!
- Make sure there are no leaks between the sampling point and the
measuring instrument.
- Do not smoke or use naked flames during the measurement.
The gas pressure kit (0554 1203) must be connected. Alternatively, the

Smart Probe testo 510i (0560 1510) can be used.
62
Oil depos.
and parameters are only available for oil
| Smoke No.
.
Averaging
WARNING
option is also available.