General Settings In The Multiproject/Project - Siemens Simatic PCS7 Function Manual

Configuring the maintenance stations

5.4 General settings in the multiproject/project

What?
Setting up SIMATIC PDM (Page 76)
Overview of complete export (Page 76)
Overview of individual export (Page 77)
Creating/updating the diagnostic screens (Page 80)
Compiling and downloading SIMATIC PDM MS (Page 82)
Changes in the project (Page 84)
Integration by the Alarm Control Center (Page 195)
5.4 General settings in the multiproject/project
MS single-station/multiple-station system overview
To monitor components with the maintenance station, check the settings specified in the
following table and adapt if necessary.
Setting
Regional language and
language for display devices
AS station name (1)
Designation of components (1)
S7 program (1)
Diagnostic blocks (1)
OS compilation mode
Plant hierarchy setting (1)
WinCC project type single-sta‐
tion project (2)
Group display hierarchy (1)
(1) Only applies to MS Basic and MS Standard
(2) Only applies to SIMATIC PDM MS
Note
There is only one MS server within a multiproject/project.
34
Location Comment
SIMATIC Manager Set a language in which the WinCC project is to be operated in
process control.
SIMATIC Manager
● <=14 characters
HW Config
● No spaces
SIMATIC Manager
● Message number range must be the same for all S7 programs
● The name of an S7 program may not be assigned twice
The diagnostic blocks must be at least version V6.1.
Use a corresponding library, if necessary.
Area-oriented
The settings of the plant hierarchy must be the same in all projects
of the multiproject/project.
WinCC Explorer The single-station project type must be selected in project prop‐
erties.
When user diagnostics is used, the group display hierarchy must
be automatically created.
in the multiproject/project
Function Manual, 03/2016, A5E36187641-AA
Configuration
SIMATIC PDM MS
X
Optional
Maintenance Station