How To Make The Settings In The Plant Hierarchy - Siemens Simatic PCS7 Function Manual

Configuring the maintenance stations
5.10 Creation of the diagnostics structure
Settings in the plant hierarchy
The following settings are made for the maintenance station in the "Plant hierarchy - Settings"
dialog box:
● Number of hierarchy levels (1)
● Area-forming level for the OS (1)
● Creation of the diagnostics structure
● Version of the Maintenance Station
● Setting for deriving names in the PH
● Selection of the maintenance station
(1) Note: Applies to all multiprojects/projects
Information on configuration of settings in the plant hierarchy is available in the following
section.
Additional information
You can find additional information on this topic in the section "Relationship between the
diagnostic structure and version (Page 52)".
5.10.2

How to make the settings in the plant hierarchy

Requirements for MS single-station system and MS multiple-station system
● The multiproject/project has been created.
● The hardware configuration is completed.
● The network configuration is completed.
● The basic parameter assignment for all components is available offline.
Requirements for SIMATIC PDM MS
● The project was not created as multiproject.
● The hardware configuration is completed
● The plant configuration is completed.
● The configuration of PC stations and network components (optional) is completed.
● The naming of components regarding LID and TAG is completed.
● All components in the process device network view are configured.
● The used IE/PB Links PN IO are configured.
50
Maintenance Station
Function Manual, 03/2016, A5E36187641-AA