How To Open Websites Via Maintenance Links; How To Open The Online View Of Hw Config - Siemens Simatic PCS7 Function Manual

6.11.2.4

How to open websites via maintenance links

Introduction
Up to 3 Web pages which are used to provide support for diagnostics measures can be called.
The icons are displayed when the calls are configured.
Requirements
● The Maintenance Station is available in the MS Standard version.
● The maintenance target (web address) has been configured.
● The maintenance target can be accessed via the network.
Icon in the user interface
Icon
Procedure
1. Click on the icon.
Result
The web page is displayed in a screen window.
6.11.2.5

How to open the online view of HW Config

Introduction
The "Call hardware project" icon is used to call the online view of the hardware configuration
(HW Config).
Note
This function is available for the maintenance station in the MS Standard version.
The hardware project can be called if the MS client is operated on the ES.
Maintenance Station
Function Manual, 03/2016, A5E36187641-AA
Function
Open maintenance link
1
Open maintenance link
2
Open maintenance link
3
Explanation Permission
Open of the config‐ "Higher process controlling" for diagnostics
ured web address area
Operator control and monitoring
6.11 Faceplate
139