Connection Display" View For Server Components - Siemens Simatic PCS7 Function Manual

Operator control and monitoring
6.11 Faceplate
● Current connection
● Status
The following table shows the icon representation of the statuses:
Operator control
Icon
6.11.3.7

"Connection display" view for server components

Available
The view is displayed for all OS servers, MS servers and OS/MS servers from the area of the
PC objects.
Note
This view is available for the maintenance station in the MS Standard version.
Overview
This view displays all clients connected to the server.
Clients are OS clients, MS clients and OS/MS clients.
156
Display
Explanation
You open the legend by clicking the icon.
The legend shows the icons designating the possible
statuses and their meaning.
When you click on the icon, the marking for server con‐
nections that have failed in the meantime is reset.
Meaning
Configured preferred servers
Currently connected server is preferred server and connection is
available
Connection available
Connection not available
Connection has failed in the meantime
Currently connected server is preferred server and connection has
failed in the meantime
The server does not assume the "Error" state and waits until its part‐
ner can take over again. Only then does the server assume the
"Fault" state.
The currently connected server is the preferred server. The server
does not assume the "Error" state and waits until its partner can take
over again. Only then does the server assume the "Fault" state.
Permission
No access protection
"Process controlling" for the di‐
agnostics area
Maintenance Station
Function Manual, 03/2016, A5E36187641-AA