Faceplate; Faceplate Display - Siemens Simatic PCS7 Function Manual

Maintenance status
Redundant component
Maintenance alarm
Configuration change
6.11

Faceplate

6.11.1

Faceplate display

Introduction
Starting from a block icon in a diagnostics screen, the maintenance engineer can open the
corresponding faceplate while the process is in operation; this faceplate provides him with
access to more detailed information and facilitates operator control of the block.
Displaying the faceplate view "Ident"
The figure below shows an example of a faceplate:
You can find information about this in the following sections.
Maintenance Station
Function Manual, 03/2016, A5E36187641-AA
Component A
Maintenance alarm
Configuration change
Operator control and monitoring
6.11 Faceplate
Component B
Configuration change
Configuration change
131