Screen Window Title And Header; Displays And Operator Controls - Siemens Simatic PCS7 Function Manual

Operator control and monitoring
6.11 Faceplate
6.11.2

Screen window title and header

6.11.2.1

Displays and operator controls

Introduction
The control bar always has the same structure. The appropriate icons are displayed depending
on the component type and on the configuration.
The following figure shows an example of the display:
Display
The following table provides an overview:
Icon Name
Screen window title
Block comment
Pin faceplate
Return
132
Display for components
from the area
● PC stations
● Network objects
● AS/system
● Field devices
● User objects
● AS/system
● Field devices
● User objects
● PC stations
● Network objects
● AS/system
● Field devices
● User objects
● PC stations
● Network objects
● AS/system
● Field devices
● User objects
Function/remark
Display of the local ID
You can find additional information about
the local ID in the section "Origin of the iden‐
tification data (Page 183)".
Display of the block comment
The local ID is displayed in the tooltip.
Pins the faceplate on the user interface
This allows you to change to another picture
or area without closing the faceplate.
Calls the process picture
After a picture change you see the process
picture in which the faceplate was called and
pinned.
Function Manual, 03/2016, A5E36187641-AA
Maintenance Station