Block Icon For Redundant Components - Siemens Simatic PCS7 Function Manual

Operator control and monitoring

6.8 Block icon for redundant components

6.8 Block icon for redundant components
Introduction
Information for a redundant component is displayed in different ways:
● In one block icon
● In several block icons
You can use the block icon to open the associated faceplate.
Block icons
The following table shows the possible types of display:
Redundant
component
IM 153-2
I/O
module
PC objects
Additional information
You can find additional information in the sections "Block icon (Page 119)" and "Maintenance
status of redundant components (Page 126)".
122
Display Explanation
The redundancy state is displayed for the component and
its partner in a diagnostic icon.
The maintenance state of each component is indicated in
the assigned diagnostic icon (top diagnostic icon).
A redundancy object is also displayed for the component
with the lower address.
The redundancy state is displayed in the diagnostic icon
of the redundancy object.
The role of master is indicated by an orange square.
The maintenance state of its partner is indicated in the
diagnostic icon.
The redundancy state is indicated in the diagnostic icon
in the redundancy object.
Function Manual, 03/2016, A5E36187641-AA
Maintenance Station