Connection Display" View For Client Components - Siemens Simatic PCS7 Function Manual

Operator control and monitoring
6.11 Faceplate
Display
● Status of the component
The following table shows the icon representation of the statuses:
Operator control
Icon
6.11.3.6

"Connection display" view for client components

Available
The view is displayed for all OS clients, MS clients and OS/MS clients from the area of the PC
objects.
Note
This view is available for the maintenance station in the MS Standard version.
Overview
This view shows all servers, the server data of which are downloaded to the client.
Servers are OS servers, MS servers and OS/MS servers.
The following figure shows an example of the view:
154
Icon identification
No icon
Explanation
You open the legend by clicking the icon.
The legend shows the icons designating the possible
statuses and their meaning.
With Profile V1.4 and higher, the stored statuses are
reset when you click the icon.
Meaning
No state
No detail information pending or available
Pending fault
There was a fault for a time
Permission
No access protection
"Process controlling" for the di‐
agnostics area
Function Manual, 03/2016, A5E36187641-AA
Maintenance Station