Configuring The Pc Station For Ms Single Station System - Siemens Simatic PCS7 Function Manual

Additional information
For more information about this, refer to the
System PCS 7 Engineering System manual and the Process Control System PCS 7; Operator
Station manual.
5.5

Configuring the PC station for MS single station system

Introduction
If you are already using an existing ES/OS single station system in the multiproject/project you
do not need to execute the following steps.
Requirement
The multiproject/project has been created.
Procedure
1. In the component view of the SIMATIC Manager, select the project into which you want to
insert the MS single station system.
2. Select the menu command Insert > Station > SIMATIC PC station.
A new SIMATIC PC station is inserted in the selected project.
3. Select the SIMATIC PC station, and then select Edit > Object Properties.
4. In the "Name:" input field, enter the name for the PC station.
5. Enter the Windows computer name in the "Computer name" input box.
6. Click "OK".
7. Select the SIMATIC PC station in the component view of the SIMATIC Manager.
8. In the detailed view, open HW Config by double-clicking the "Configuration" object.
The hardware configuration of the SIMATIC PC station opens.
9. If the hardware catalog is not visible, select the menu command View > Catalog.
The hardware catalog opens.
10.Under "SIMATIC PC Station > HMI" in the hardware catalog, select the WinCC application
and drag it into the configuration table.
11.If you want to monitor PC stations and/or network objects, under "SIMATIC PC Station >
User application > OPC server" in the hardware catalog select the OPC server and drag it
into the configuration table.
12.If you want to use SIMATIC PDM, under "SIMATIC PC Station > PDM" in the hardware
catalog, select the PDM application and drag it into the configuration table.
13.Insert any additional components, for example, network cards.
For Ethernet connections, it is recommended to use the IE General interface.
Maintenance Station
Function Manual, 03/2016, A5E36187641-AA
Configuring the maintenance stations
5.5 Configuring the PC station for MS single station system
Process Control
35