Siemens Simatic PCS7 Function Manual page 187

The following table shows the assignment of the identification data displayed on the MS to the
origin.
Identification data
TAG / HID
LID
Address
Description
Message
Device type
Manufacturer
Article number
Serial number
Installation date
HW revision
SW revision
Last update
Comment
Article number = also order number or MLFB
1)
I&M profile according to PNO
The data are displayed if they can be read from the device.
The following table shows the assignment of the identification data displayed on the MS to the
origin.
Identification data
TAG / HID
LID
Address
Description
Message
Device type
Manufacturer
Article number
Serial number
Installation date
HW revision
SW revision
Last update
Comment
Article number = also order number or MLFB
1)
Maintenance Station
Function Manual, 03/2016, A5E36187641-AA
Origin
Profile tag "TAG_DESC"
HW Config "Designation"
HW Config "Slot/address information"
Profile tag "DESCRIPTOR"
Profile tag "DEVICE_MESSAGE"
Profile tag "DEVICE_ID"
Profile tag "DEVICE_MAN_ID"
Not available
1)
Profile tag "DEVICE_SER_Num"
Profile tag "DEVICE_INSTAL_DATE"
Profile tag "HARDWARE_REVISION"
Profile tag "SOFTWARE_REVISION"
Time stamp of the updating of the PDM database
HW Config/Object properties "Comment"
Origin
Profile tag "TAG_FUNCTION"
HW Config "Designation"
HW Config "Slot/address information"
Profile tag "DESCRIPTOR"
Not available
Profile tag "PROFILE_ID"
HW Config Type or Short description
Profile tag "ORDER_ID"
1)
Profile tag "SERIAL_NUMBER"
Profile tag "INSTALLATION_DATE"
Profile tag "HARDWARE_REVISION"
Profile tag "SOFTWARE_REVISION"
Time stamp of the updating of the PDM database
HW Config/Object properties "Comment"
Operator control and monitoring
6.12 Origin of the identification data
187