Identification Data For Devices That Are Integrated Using A Device Description (Edd) - Siemens Simatic PCS7 Function Manual

Operator control and monitoring
6.12 Origin of the identification data
Identification data
Device type
Manufacturer
Article number
Serial number
Installation date
HW revision
SW revision
Last update
Comment
Not accessible means that the user cannot make an entry or modification here.
1)
Article number = also order number or MLFB
2)
6.12.5

Identification data for devices that are integrated using a device description (EDD)

Where does the identification data for devices that are integrated using a device description (EDD)
come from?
In the case of the faceplate for devices that are integrated using a device description (EDD),
the identification data is provided via SIMATIC PDM.
The data are provided if the device description is created in conformance with the specifications
of the PROFIBUS & PROFINET International organization, the Hart Communication
Foundation, or the Fieldbus Foundation.
The information is largely based on the tag names used in the EDDs. These tag names can
be optionally displayed in the configuration interface of PDM. The display is activated in the
settings of SIMATIC PDM.
PA profile according to PNO
The data are displayed if they can be determined explicitly using the EDD of the device.
186
static
dynamic
2)
static
dynamic
static
dynamic
static
dynamic
static
dynamic
static
dynamic
Origin
HW Config "type" or "short description"
HW Config - Not accessible
I&M data (SZL), (I&M0 Manufacturer_ID)
HW Config "Article number"
I&M data (SZL), (I&M0 Order_ID)
Not available
I&M data (SZL) (I&M0 Serial_number)
HW Config "installation date"
I&M data (SZL), (I&M2 Installation_date)
Not available
I&M data (SZL) (I&M0 Hardware_revision)
HW Config - Not accessible*
I&M data (SZL) (I&M0 Software_revision)
Time stamp of the updating of the identification
data
HW Config "Comment"
Function Manual, 03/2016, A5E36187641-AA
1)
2)
Maintenance Station