Configuring the maintenance stations
5.1
MS single station system overview
The following table lists the topics that include information and configuration instructions. The
sequence in the table corresponds to the recommended configuration sequence.
What?
General settings in the multiproject/project (Page 34)
Configuring the PC station for MS single station system (Page 35)
Configuring the monitoring of industrial PCs and network objects (Page 44)
Creation of the diagnostics structure (Page 49)
Advanced diagnostics settings (Page 54)
Configuring the user diagnostics (Page 69)
Setting up SIMATIC PDM (Page 76)
Overview of complete export (Page 76)
Overview of individual export (Page 77)
Engineering for maintenance (Page 78)
Creating/updating the diagnostic screens (Page 80)
Compilation and downloading of the Maintenance Station (Page 82)
Changes in the project (Page 84)
Integration by the Alarm Control Center (Page 195)
Maintenance Station
Function Manual, 03/2016, A5E36187641-AA
5
MS
MS
Basic
Standard
X
X
-
X
-
X
-
31