Configuring The Stations; Configuration Overview - Siemens SIMATIC PCS 7 SMART Getting Started

5.4

Configuring the stations

5.4.1

Configuration overview

Overview
Configure the control system components which the PCS 7 wizard: 'New Project' has
automatically inserted. This includes components such as the AS, the OS, and the associated
connections.
For this purpose you must perform the following configuration steps:
Step
1
2
3
4
5
Local PC station
The plant configuration for this Getting Started is a single station system; the ES and OS are
on one computer. In this way, the local PC station you configure represents the ES and the
OS at the same time.
PCS 7 SMART Getting Started - Part 1 (V9.0 with APL)
Getting Started, 12/2017, A5E42181435-AA
Action
Configure AS (Page 42)
Rename PC station (Page 44)
Configure OS (Page 45)
Set connection in NetPro (Page 47)
Download hardware configuration (Page 50)
Initial work for the project
5.4 Configuring the stations
41