Table of Contents
Advertisement
Parameter description 0.. Operation and display
000
Language select
(Language)
001
Setup selection,
operation
(Setup operatio)
82
Value:
English (ENGLISH)
German (DEUTSCH)
French (FRANCAIS)
Danish (DANSK)
Spanish (ESPANOL)
Italian (ITALIANO)
Value:
Factory setup (FACTORY SET)
Setup (SETUP 1)
Setup (SETUP 2)
Setup (SETUP 3)
Setup (SETUP 4)
Multi setup (MULTI SETUP)
Example:
Setup
Terminal 17
1
0
2
0
3
1
4
1
= Factory setting. Text in ( ) = Display text.
The figures in [ ] are used in bus communication.
®
MG.30.A7.02 - VLT
is a registered Danfoss trademark
The choice in this parameter defines the
[0]
language of the display.
[1]
[2]
[3]
[4]
[5]
Function:
The menu setup to control the VLT
[0]
[1]
frequency converter can be selected. The
[2]
parameters which can be changed are
stated on pp. 149-150. If several setups
[3]
[4]
are required, up to four different alterna-
tives can be selected. Remote-controlled
[5]
selection between different setups can be
operated from terminals 16/17 or 32/33 and
the serial port.
Terminal 16
0
Description of choices:
1
Factory setup contains the factory-pro-
0
grammed data. Can be used as a data
1
source if the other setups are to be re-
turned to a known status. Here the lan-
guage is always English. It is not possible
to change any other data when this setup
is selected.
Setup 1-4 is four individual setups which
can be used as required. The current
running setup can be changed, and the
changes have an immediate impact on the
unit's function.
Multi setup is used for remote-controlled
operation between more than one setup.
Terminal 16/17 (para. 400/401), terminal
32/33 (para. 406) or the serial bus can be
used to alternate between the setups.
®
Hide quick links:
Advertisement
Table of Contents
