Danfoss VLT 3000 Series Product Manual page 112

Parameter description
414
Time out
(Time out)
415
Time out function
(Time out act.)
112
Value:
0 - 99 OFF 100 OFF
Value:
Freeze (freeze)
Stop (stop)
Jogging (jog)
Max. speed (max)
= Factory setting. Text in ( ) = Display text.
The figures in [ ] are used in bus communication.
®
MG.30.A7.02 - VLT is a registered Danfoss trademark
4.. Inputs and outputs
If one of the "live zero" signals has been
selected (e.g. 4-20 mA) and this is less
than 2 mA, a fault message and a required
operating status after expiry of the pro-
grammed interval are activated.
[0]
[1]
The required operating status is selected in
[2]
parameter 415.
[3]
®
The VLT 's reference can be frozen to the
current value, go to stop, go to the jogging
frequency entered in parameter 203, or go
to the maximum frequency in parameter
202.
The function is not active for local speed
reference (para. 004) when open loop or
slip compensation is selected (para 101).