Adjusting The Supports - Otto Bock C1000 SF Instructions For Use Manual

Settings
1) Loosen the two screws on the underside of the armrest
(see fig. 6).
2) Move the armrest with the control panel holder or
replacement tube forward or backwards along the
attachment rail to the desired position.
3) Retighten the two screws.
Fig. 6 Adjusting the armrest position

6.6 Adjusting the supports

The position of the supports (optional) can be adapted to
the requirements of the user.
18 | Ottobock
Changing the position of the supports on the seat
There are receivers for a support on the right and left side of
the seat frame.
The receivers can be attached over the entire seat depth
range. Several slotted holes are provided in the seat frame
for this purpose.
1) Loosen the two screws on the seat frame (see fig. 7).
2) Slide the receivers forward or backward on the seat
frame along the slotted hole. If needed, select a different
slotted hole for the receiver.
3) Retighten the two screws.
Fig. 7 Changing the position of the support on the seat
C1000 SF