Fig. 12
Adjusting the height of the chest belt
1
Chest belt holder
6.10 Adjusting the headrest
The position of the headrest can be adapted to the require
ments of the user.
The bracket for attaching the headrest mounting kit is
attached with an adapter which is mounted to the back
frame as part of the order (see fig. 13).
INFORMATION
See the manufacturer documentation provided for informa
tion on adjusting the headrest.
C1000 SF
2
Support holder
Fig. 13
Adapter for headrest mounting kit
6.11 Adjusting the seat cushion
The length of the seat cushion must be adapted to the seat
depth (see fig. 14).
1) Unzip the seat cushion cover completely.
2) Pull the insert halfway out.
3) Measure the length of the insert to be cut off and mark
this distance parallel to the back edge.
4) Cut off the excess from the insert with a knife.
Settings
Ottobock | 23