Folding Up The Backrest 14 - Otto Bock C1000 SF Instructions For Use Manual

Preparation for use
5.1 Activating the circuit breaker
The automatic circuit breaker has to be activated before the
power wheelchair can be switched on.
It is located underneath the seat next to the right drive
wheel.
> The control unit is turned off.
1) Push up on the reset lever, which is at an angle, until it
engages (see fig. 1, item 1).
2) The circuit breaker is activated.
Fig. 1 Activating the automatic circuit breaker
1 Reset lever for activation
2 Pushbutton for deactivation
14 | Ottobock
5.2 Folding up the backrest
Folding up the backrest
1) Fold up the armrests.
2) Fold the backrest up.
3) Insert the cotter pin (double spring cotter) (see fig. 2).
4) Push the unlock button and engage the back strap in
the back strap lock (see fig. 3).
5) If needed: Tighten the strap on the rear of the backrest.
6) Fold down the armrests.
Fig. 2 Insert/pull out the cotter pin
C1000 SF