G Glossary; Acronyms, Definitions, And Terms - Oracle Acme Packet 1100 Hardware Installation Manual

G

Acronyms, Definitions, and Terms

DRAFT
Proprietary and Confidential
Acme Packet 1100 Hardware Installation Guide
ACLI — Acme Command Line Interface is the command line interface used by
Acme Packet to configure, maintain, and monitor SBCs and other Acme Packet
products.
AC — Alternating Current refers to the 120-volt electricity delivered by power
utilities to three-pin power outlets.
AWG — American Wire Gauge is a United States standard set of non-ferrous wire
conductor sizes. The gauge means the diameter.
BTU — British Thermal Unit
CSA — Canadian Standards Association is a non-profit, independent organization
that operates a listing service for electrical and electronic materials and equipment.
Cu — Copper
DSP — Digital Signal Processor
EMC — Electromagnetic Compatibility is the ability of equipment or systems to be
used in their intended environment within designed efficiency levels without
causing or receiving degradation due to unintentional electromagnetic interference.
ESD — Electrostatic Discharge is the rapid discharge of static electricity from one
conductor with an electrical charge to another of a different electrical charge.
CE — European Compliance
EN — European Norm
FCC — Federal Communications Commission
FG — Frame ground
flash memory — Flash memory is a solid-state, non-volatile, re writable memory
that functions like a combination of RAM and a hard disk drive.
IEEE — Institute of Electrical and Electronics Engineers is an organization composed
of engineers, scientists, and students. The IEEE is best known for developing
standards for the computer and electronics industry.
ICES — Interference-causing Equipment Standard
IEC — International Electrotechnical Commission
Glossary
57