Component Overview; Chassis; Proprietary And Confidential; Mounting Hardware - Oracle Acme Packet 1100 Hardware Installation Manual

2

Chassis

DRAFT
ACME PACKET 1100

Proprietary and Confidential

Mounting Hardware

System Processor

System Panels

Front Panel
Acme Packet 1100 Hardware Installation Guide
The Acme Packet 1100 can be installed in a variety of configurations. The appliance
can either be installed on a desktop/shelf, wall mounted or rack mounted.
Figure 2 - 1. Acme Packet 1100 - Front Panel
LNK ACT LNK ACT LNK ACT LNK
SER MGT NET MGT INT EXT
Figure 2 - 2. Acme Packet 1100 - Rear Panel
The Acme Packet 1100 can be mounted in a variety of ways that are explained in the
chapter on installation of the chassis.
The Acme Packet 1100 processor module (CPU) is located on the main board of the
Acme Packet 1100 System. The CPU handles both the management and signal
processing within the system.
This section describes the Acme Packet 1100 front and rear panels.
The Acme Packet 1100 front panel features a USB port as well as indicators to reflect
power to the chassis, Ethernet link/activity status of the rear panel interface ports,
and HA status.

Component Overview

ACT
NET MGT INT EXT
LNK LNK LNK
PWR
OK
ACT ACT ACT
12V
11