Visual Inspection - Rotax 912 i Series Maintenance Manual

General note The scope of a visual inspection generally includes, but is not necessarily limited to, the
following.
Moving parts Normal operating condition, accurate alignment, leak-tightness, cleanliness, ease of
movement, adjustment, mechanical stress, travel, catching, extreme wear, cracks, corro-
sion, deformation and other visually evident damage.
Parts Secure seating, surface condition, cleanliness, deformation, cracks in welding seams or
due to material fatigue or stress, corrosion and other visually evident damage.
Fuel-, Air- and Oil Cracks, dents, kinks, required flexibility, collapsed lines/hoses, abrasion, cleanliness, se-
lines and Hoses cure seating and other visually evident damage.
Wiring General cleanliness; loose, corroded or broken terminals; chafed, broken or worn insula-
tion; secure seating, heat damage and other visually evident damage.
Screws and Nuts Surface damage, secure seating, locking wire, securing paint and other visually evident
damage.
Filter and Filters and screens must be inspected for contamination and potential blockages, cleaned
Screens and replaced as required.
Effectivity: 912 i Series
Edition 2/Rev. 0
BRP-Rotax
MAINTENANCE MANUAL LINE

VISUAL INSPECTION

05–20–00
Page 5
September 01/2018