Rotax 912 i Series Maintenance Manual page 63

Points of Inspection
* no periodic maintenance require-
ment after the first 25 hours of
operation
Check the oil tank and clean the oil
tank if contaminated.
Refill oil tank with approx. 3 litres of oil.
For oil quality, see Operators Manual
latest edition.
Install new oil filter
(5 In the case more than 30% of operation with leaded fuel e.g.: AVGAS 100 LL
Check the electric fuel pumps.
Inspect the fuel system on the engine
side for leaks.
Inspect the fuel system for damages.
On configurations with auxiliary alter-
nator, check the attachment and the V-
belt tension.
Inspect screws and nuts of all external
parts for tight fit. Inspect safety wiring,
replace as necessary.
Check all temperature sensors.
Check all pressure sensors.
Check all exhaust gas temperature
sensors.
Check all speed sensors.
Effectivity: 912 i Series
Edition 2/Rev. 0
BRP-Rotax
MAINTENANCE MANUAL LINE
Interval Operating hours
25* 50 100
X X (5 X
X X X
9) Electric fuel pump
every 1000 h
10) Fuel system
X
X
11) Auxiliary alternator
X X
12) Engine external parts
X
13) Engine sensors
X X
X X
X X
X X
Reference
200 600 1000
X (5 X (5 X 12–20–00
Oil change,
Cleaning the
X X X 12–20–00
Purging the
oil system
X X X 12–20–00
12–20–00
Fuel pumps
12–20–00
Fuel system
X X X 12–20–00
Checking the
Chapter Signa-
ture
oil tank
Oil filter
change
V-belt
tension
05–20–00
Page 13
September 01/2018