Rotax 912 i Series Maintenance Manual page 145

General note
NOTE
It is advisable to check the oil level prior to an oil change as it informs about oil
consumption.
See
Observe
Observe the following to prevent possible unintentional voiding of the oil system
• Draining the suction lines, oil cooler and return line is not necessary and must be
• Replacement of the oil filter and the oil change should be effected quickly and without
Effectivity: 912 i Series
Edition 2/Rev. 0
MAINTENANCE MANUAL LINE
For detailed information see Service Instruction SI-912 i-005 "oil change",
latest issue.
Risk of burns and scalds. Hot engine parts.
Always allow engine to cool down to ambient temperature before starting work.
Ignition "OFF" and system grounded! Disconnect negative terminal of battery.
Chapter 12-10-00 section Oil level
avoided, as it results in air entering the oil system. Otherwise SI-912 i-004 must be
accomplished.
See Chapter 12-20-00 section Purging the oil
interruption to prevent a draining of the oil system and the hydraulic tappets.
BRP-Rotax
m WARNING
m WARNING
Risk of electric shock!
check/Replenish.
ATTENTION
and damage to the valve drive:
system.
12–20–00
Page 33
September 01/2018