Replace Moisture Trap - KaVo HealOzone 2130 C Instructions For Use Manual

Instructions for use HealOzone 2130 C
|
7 Maintenance 7.2 Maintenance

7.2.4 Replace moisture trap

Note
When the liquid trap is filled half way with liquid, it needs to be exchanged.
Saliva and other liquids collect in the moisture trap that are drawn by the HealOzone
vacuum into the handpiece. The prevents the ozone neutraliser from soiling. The
system is supplied with an 10 moisture traps. Additional moisture traps can be ob‐
tained from the authorised dealer.
▶ Pull the end of the hose off of the connector ⑥.
▶ Unfasten the screw cap on the other end tubing end from the thread ⑤.
▶ Dispose of the moisture trap ④ in accordance with local and national regulations
governing the disposal of contaminated waste.
▶ Remove new moisture trap ③ from packaging and fasten the screw cap on the
end of the tubing onto the thread marked ②.
▶ Fit the other tubing end on the connection piece marked ①.
6
5
4
Note
Make sure tubing does not buckle or twist.
49/57
1
2
3