Replace Desiccant - KaVo HealOzone 2130 C Instructions For Use Manual

Instructions for use HealOzone 2130 C
|
7 Maintenance 7.2 Maintenance

7.2.3 Replace desiccant

The HealOzone unit needs dry air to generate ozone. The suctioned air is dried by
the desiccant. The system is supplied with an air drier. The desiccant is obtainable
from your HealOzone authorised dealer. The device shows that the desiccant has
been changed.
▶ Pull the end of the tubing ① out of the lower connection piece and remove the
air dryer ③.
▶ Remove stopper ④ from the air dryer.
▶ Take out the used desiccant and dispose of in accordance with local and national
waste disposal regulations.
▶ Place funnel over air dryer and pour in the new desiccant to fill the air dryer.
▶ Seal the air drier with a plug ④ and snap it into the holder ②.
▶ Fit the end of the tubing ① onto the lower connection piece.
3
2
1
Note
After the desiccant has been replaced, the unit must complete a test run.
4
48/57