KaVo HealOzone 2130 C Instructions For Use Manual page 40

Instructions for use HealOzone 2130 C
|
5 Operation 5.3 Endo mode
If the operating mode "Normal/Endo" does not correspond with the attachment on
the handpiece "without cannula/ with cannula", the device displays the message
"Check cannula". Solution: select corresponding mode.
Recommendations for Using HealOzone in Endodontics
The following treatment sequence provides a recommendation on how ozone (KaVo
HealOzone) can be used for endodontic treatment.
The procedure was taken from daily practice and consists of 10 steps.
Steps 1 to 10:
1. Removal of surface caries with a round burr.
2. Disinfection in the zone of bacteria with the HealOzone (no cannula, 40 seconds)
3. Complete removal of caries with a round burr and cleaning with PROPHYflex
and PROPHYpearls
4. Extripation, rinsing (NaOCl 3%)
5. Electrical measurement of length and x-ray measurement (forensics)
6. Preparation (mechanical/manual, for example with ProTaperm ProFile, RaCe)
- EDTA 17% = lubricant
- NaOCl 3 % = tissue degradation
7. Ozone application in NaOCl in channel or in dry channel (with cannula, 60 se‐
conds/channel).
- Cleaning, disinfection, destruction of biofil
8. General drying (with paper points)
9. Disinfection and drying (with cannula, 40 seconds/channel)
10. Obturation (lateral cond., vertical cond., thermoplastic)
38/57