KaVo HealOzone 2130 C Instructions For Use Manual page 12

Instructions for use HealOzone 2130 C
|
2 Safety 2.2 Intended purpose
Immunity tests
Electrostatic discharge
(ESD) according to IEC
61000-4-2
Fast transient electrical di‐
sturbances/ Bursts accor‐
ding to IEC 61000-4-4
Surges according to IEC
61000-4-5
Voltage interruptions,
short-term interruptions
and fluctuations of the
supply voltage according
to IEC 61000-4-11
Magnetic field with a sup‐
ply frequency (50/60 Hz)
according to IEC
61000-4-8
Table 2
IEC 60601 test level
± 6 kV contact discharge ±
8 kV air discharge
± 2 kV for power lines ± 1
kV for input and output li‐
nes
± 1 kV normal mode volta‐
ge ± 2 kV common-mode
voltage
< 5% V (> 95% drop in the
VT for ½ period 40% V
(60% drop in the VT for 5
periods 70% V(30% drop
in the VT for 25 periods<
5% V(> 95% drop in the VT
for 5 s (250 periods)
3 A/m
NOTE: V T is the alternating mains voltage before the test level is used.
Conformance level
± 3 kV contact discharge ±
8 kV air discharge
± 2 kV for power lines
± 1 kV push-pull voltage ±
2 kV common-mode volta‐
ge
10/57
Electromagnetic environ‐
ment - guidelines
Floors should be made of
wood or concrete or have
ceramic tiles. When the
floor is made of synthetic
material, the relative humi‐
dity must be at least 30%.
The quality of the supply
voltage should correspond
to that of a typical business
or hospital environment.
The quality of the supply
voltage should correspond
to that of a typical business
or hospital environment.
The quality of the supply
voltage should correspond
to that of a typical business
or hospital environment.
When the user of the Hea‐
lOzone 2130 C needs con‐
tinued operation even
when the power supply is
interrupted, it is recom‐
mended to supply the
HealOzone 2130 C from
an uninterrupted power
supply or a battery.
Magnetic fields at the
mains frequency should
correspond to typical va‐
lues in a business and
hospital environment.