Decommissioning; Disconnecting The Electrical Connection; Disconnecting The Electromatic From The Treatment Unit; Unplugging The Motor/Comfortdrive - KaVo ELECTROmatic M Instructions For Use Manual

Hide thumbs Also See for ELECTROmatic M:

Table of Contents

Instructions for use ELECTROmatic M/C and PM/PC

7 Decommissioning | 7.1 Disconnecting the electrical connection

7 Decommissioning

▶ To disconnect the power cable from the mains, unplug the connector of the

power supply from the supply mains socket.

▶ Unplug the power cable from the device.

7.2 Disconnecting the ELECTROmatic from the treatment

unit

▶ Disconnect the 4-hole, 5-hole or 6-hole hose of the treatment unit from the

filter or the adapter of the 2-hole to 4-hole connector of the ELECTROmatic.

▶ Unplug the plug of the motor cord from the connector on the device. Make

sure to grasp the plug as close to the device as possible.

Note

Clean and disinfect the motor while it is connected to the motor cord.

Table of Contents