Siemens XC1003-A Technical Manual page 83

Change the function of the monitored input 3
Select Option Function
KEY13 5 Function "Emergency hold" 2
▼ In state "Activated":
"Active 1" = ON
"Active 1" cancelled = Activated time continue and if activated time is
"Active 2" = ON
In state "Normal":
"Active 1" = ON
"Active 1" cancelled = Return to normal state
"Active 2" = ON
"Active 2" cancelled = Blocking disabled
6 Function "Block" 1
In state "Activated":
"Active 1" = ON
In state "Normal":
"Active 1" = ON
"Active 1" cancelled = Blocking disabled
7 Function "Block" 2
In state "Activated":
"Active 1" = ON
"Active 2" = ON
In state "Normal":
"Active 1" = ON
"Active 1" cancelled = Blocking disabled
"Active 2" = ON
"Active 2" cancelled = Blocking disabled
"Active 1" = 680 , "Active 2" = 1k2
Suppress "Reset" upon stopped activated time by the monitored input 3
Select Option Function
KEY14
8 (default) Function "Reset" available
▼
9 Function "Reset" suppressed
Note: Do not select option 1 with option 9 together because Reset will
never be allowed
Change the fault processing of the monitored input 3
Select Option Function
KEY15
10 (default) State "Short circuit" and "Open" = "Fault" + "Emergency hold/abort"
▼
11 State "Short circuit" and "Open" = "Fault"
Building Technologies
Fire Safety & Security Products
(Programming Step 8, continued)
= Activated time continue, but stop at beginning
of released
LED26 lights up
Horn turns to "Hold/Abort" tone
elapsed state released occurs
Horn returns to "Activated" tone
= No reaction
= Block the activated process. When new alarm
happens, system enters activated state
LED26 lights up
= Manual only
= No reaction
= Manual only
= No reaction
= No reaction
= Autom. & Man. blocked
= Manual only
Programming the user functions
Zone 1 Zone 2 Zone 3
Red Yel. Red Yel. Red Yel.
– – – – –
– – – – –
– – – – –
Zone 1 Zone 2 Zone 3
Red Yel. Red Yel. Red Yel.
Zone 1 Zone 2 Zone 3
Red Yel. Red Yel. Red Yel. Red
A6V10099837_a_en
Zone 4
Red Yel.
Zone 4
Red Yel.
–
Zone 4
Yel.
–
83
12.2007