Parameter Group 500: Fixed-Frequency, Automatic Cycling Frequencies; Programming Of The Individual Fixed-Frequencies - EURA DRIVES E800 series Safety Instructions, Installation And Operating Manual

12) Parameter group 500: Fixed frequencies, automatic cycling frequencies

12) Parameter group 500: Fixed-frequency, automatic cycling frequencies

Up to 15 fixed-frequencies are selectable on E800 inverters, including individual ramp and direction setting.
Automatic cycling sequence for up to 8 fixed-frequencies can be set, including ramp, direction, run- and pausing time.
Set parameter F203=4 (F204=4), to select fixed frequency mode:
F500
Fixed-frequency
mode selection
F203 F500 Fixed frequency mode
3 Fixed frequencies
4 0
15 Fixed frequencies
4 1
Up to 8 auto-cycling fixed
4 2
Auto-cycling parameter:
F501
Number of different frequencies for
auto-cycling function
F502
Number of automatic cycles
F503
Status after cycle completed

Programming of the individual fixed-frequencies:

F504
Fixed-frequency 1 (Hz)
F505
Fixed-frequency 2 (Hz)
F506
Fixed-frequency 3 (Hz)
F507
Fixed-frequency 4 (Hz)
F508
Fixed-frequency 5 (Hz)
F509
Fixed-frequency 6 (Hz)
F510
Fixed-frequency 7 (Hz)
F511
Fixed-frequency 8 (Hz)
F512
Fixed-frequency 9 (Hz)
F513
Fixed-frequency 10
F514
Fixed-frequency 11
F515
Fixed-frequency 12
F516
Fixed-frequency 13
F517
Fixed-frequency 14
F518
Fixed-frequency 15
E800 – Rev.01 -EN- SOFT Rev. 2.04
© 2015 EURADRIVES EUROPE GmbH
Selection:
0: 3 Fixed frequencies are available
1: 15 Fixed frequencies available, binary coded (K1, K2, K3, K4 - terminal)
2: Up to 8 Fixed frequencies – auto-cycling mode
direct selection
binary selection
frequencies
Selection: 2...8
Range: 0....9999
Selection: 0: Stop
F519 F534 F549
F520 F535 F550
F521 F536 F551
F522 F537 F552
F523 F538 F553
F524 F539 F554
F525 F549 F555
F526 F541 F556
F527 F542 F573
F528 F543 F574
F529 F544 F575
F530 F545 F576
F532 F546 F577
F532 F547 F578
F533 F548 F579
Description
To combine with analogue control, fixed-frequencies have
priority
To combine with analogue control, fixed-frequencies have
priority
Independent mode, no manual frequency control is possible during
cycle, except STOP command – F501, F502, F503 are the auto-
cycling parameters
0 = Endless cycling
1: Keep last valid frequency
F557 F565
Range for
F558 F566
F504 –
F559 F567
F112 .......F 111
F560 F568
F561 F569
F562 F570
F563 F571
F564 F572
- 51 -
Default: 1
Default setting: 7
Default setting: 0
Default setting: 0
Default setting:
Accel./Decel. time,
depending on
inverter model
0.2 - 4.0KW: 5.0 sec.
5.5 - 30KW: 30.0 sec.
>30kW: 60 sec.
Default: 5.00Hz
Default: 10.00Hz
F518:
Default: 15.00Hz
Default: 20.00Hz
Default: 25.00Hz
Default: 30.00Hz
Default: 35.00Hz
Default: 40.00Hz
Default: 5.00Hz
Default: 10.00Hz
Default: 15.00Hz
Default: 20.00Hz
Default: 25.00Hz
Default: 30.00Hz
Default: 35.00Hz