Activation and configuration of the "S" shaped ramp
F304
Initial progression
F305
Final progression
F306
"S" shaped ramp activation
Frequency threshold setting
F307
Frequency threshold 1 (Hz)
F308
Frequency threshold 2 (Hz)
F309
Hysteresis
This are frequency thresholds for signalling through programmable digital outputs - function assignation:
Hysteresis to subtract from threshold value
Current threshold
F310
Stromschwelle (A)
F311
Hysterese Stromschwelle
Current threshold, signalled through programmable digital outputs - function assignation: 17.
Hysteresis to subtract from threshold value
F312
Hysteresis to target frequency (Hz)
-Valid for the "end of ramp" message through digital outputs – output function assignation:
- Hysteresis to subtract from threshold value
E800 – Rev.01 -D- SOFT Rev. 2.04
© 2015 EURADRIVES EURDIE GmbH
10) Parametergruppe 300: Digital I/O Konfiguration
Range: 2.0....50%
Selection: 0=Linear ramp
1="S" ramp
Range: F112 - F111 (Hz)
Range: 0...100%
Range: 0...1000 A
Range: 0...100%
Range: 0.00...5.00 Hz
- 44 -
Default setting 30%
Default setting 0
Default setting 10Hz
Default setting 50Hz
Default setting 50 %
2 /
3.
Default setting Nennstrom
Default setting 10%
Default setting 0.00
15