General Description
3
The SARGENT SN200/210 Series brings the latest in security and versatility to our Integrated Wired
access control solutions. Featuring Signo Reader Technology from HID Global
is ideal for mixed credential environments and enables easy migration to higher security
credentials and mobile access. Available with either a keypad or non-keypad reader, the SN200/210
offers the convenience of using card or PIN for authentication or for added security, card plus PIN
allowing dual factor authentication.
The SN200 is available with Wiegand communication protocol while the SN210 communicates via
Open Supervised Device Protocol (OSDP) allowing for secure channel serial communication between
the reader and the access control system.
Backed by SARGENT's Grade 1 hardware, the SN200/210 cylindrical lock features Request to Exit (RX)
monitoring inside the lock body and is available in 12 or 24 VDC. The SN200/210 reader provides visual
(LED) and audible indicators of lock state (locked/unlocked).
Specifications / Features
4
•
Latch – 1/2" standard
3/4" throw fire-rated double doors (optional) (41- prefix)
•
Deadlocking latch
•
Handing (must specify)
•
Locks furnished for 1-3/4" doors only
•
Fail Safe or Fail Secure Application
•
Inside lever provides RX (request to exit) signal
•
Outside lever controlled by any compatible credential
•
Supports multiple credential formats:
• 2.4 GHz credential compatibility
• Secure Identity Object
•
13.56 MHz credential compatibility:
• Secure Identity Object™ (SIO) on iCLASS Seos,
iCLASS SE/SR, MIFARE DESFire EV1/EV2 and MIFARE Classic
(on by default)
• Standard iCLASS Access Control Application, ISO14443A
(MIFARE) CSN, ISO14443B CSN, and ISO15693 CSN
• Apple Wallet
• NFC-enabled mobile phones
• 125 kHz credential compatibilty:
• HID Prox
For Mobile Credential-Enabled versions of this electronic lock
(Indicated by "BIPS or BIKPS" in the product order string):
• Mobile Credentials are transmitted to the lock via Bluetooth Smart or NFC ISO/IEC14443 and
must use a mobile device enabled with these technologies.
• Credential and mobile device versions are specified by the credential provider.
• User must acquire the latest HID "Mobile Access" application available from Apple iStore or
Android PlayStore.
Compliance with IEEE 802.3 (at or af) specifications was not verified as part of UL294/B.
(SIO) on Mobile IDs (Bluetooth Smart)
™
, AWID, EM4102
®
4
SN200/210 Cylindrical Lock
, the SN200/210 Series
®
•
Lock body available 12VDC/24VDC
•
UL and CUL listed for use on Fire Doors
•
Listed to UL 294 (Access Control System Units)
within the U.S. only*
•
Wires directly to EAC Panels
•
Wire from EAC Panel to door must be shielded with
a drain. Drain terminated at EAC Panel controller.
•
Complete monitoring of door (3287 Door Position
Switch included)
A8282A • 800-810-WIRE (9473) • www.sargentlock.com