General Description; Hardware Specifications; Electronic Specifications - Sargent ASSA ABLOY IN100 Series Installation Instructions Manual

2

General Description

The SARGENT IN100 lock with Aperio™ Technology makes it easy and cost-effective to bring access control to
®
more doors. It uses local wireless communication between the lock and an Aperio hub to connect to an access
control system, eliminating the greatest cost and inconvenience of traditional access control – the wiring at the
door. The IN100 utilizes HID
credentials, including mobile access.
All technology features are supported by the physical security of SARGENT ANSI/BHMA Grade 1 hardware -
quality components that provide high security, performance and durability.
3

Hardware Specifications

• Complete lockset with on-board memory
• ADA compliant
• Easily retrofits existing door preps (mortise)
• Latch - Stainless steel
• Optional deadbolt - Hardened steel
• Guardbolt - Stainless steel, non handed
• Handing (RH/RHR/LH/LHR) must be specified,
but is easily field-reversible without opening
the lock case
Note: A weather-protective gasket is required for exterior applications.
4

Electronic Specifications

• Input Power: DC 9V, 1.5A (6 AA alkaline batteries)
• Optional hard-power 12-24VDC, 1.0A
• Utilizes IEEE 802.15.4 wireless communication
• HID multiCLASS SE
®
• High Frequency (13.56 MHz):
• HID iCLASS
• HID iCLASS SE
• HID iCLASS
• HID MIFARE
• HID DESFire
• MIFARE Classic
• DESFire EV1
• PIV/PIV-I (40-bit BCD, 64-bit BCD, 75 bit, 128-bit or 200-bit outputs)
*For specific security information, please contact your local ASSA ABLOY Door Security Solutions
sales consultant or call 800-810-WIRE.
!
To comply with "Fire Listed" doors, the batteries must be replaced with alkaline batteries only.
Warning: SARGENT Mfg. Co. IN100 locksets utilizing a door position switch (DPS) are not rated for,
or intended for use in life safety applications.
multiCLASS SE technology; it supports heightened identity security and multiple
® ®
technology offers support for the following credentials:
®
®
(SIO-enabled)
®
Seos™
®
SE
®
EV1 SE
®
4
• Case - 12 gauge heavy duty wrought steel
• Cylinder retracts latchbolt (and deadbolt)
• Inside lever retracts latch and deadbolt
simultaneously
• Lock furnished for 1-3/4" doors.
For other thicknesses, consult factory.
• UL listed and labeled for up to 3 hour fire rated
openings
• Outside lever controlled by any combination of
contactless reader or mechanical cylinder
• Uses AES 128-bit wireless encryption*
• Privacy button
• Low Frequency (125 kHz):
• HID Prox , AWID, EM4102
®
• NFC & BLE-enabled Mobile Phones:
• HID Mobile Access (BLE and NFC)
• Seos Apple Wallet (NFC)
1-800-810-WIRE • www.sargentlock.com • A8190E
IN100 Series
Mortise Lock
Installation Instructions