Advertisement
General Description
2
The SARGENT Harmony Series H1 Cylindrical Lock is designed to interface with existing Wiegand
Electronic Access Control (EAC) panels. The reader requires 12VDC for power and is available with
125 kHz HID
proximity technology. The H1 technology is backed by SARGENT's Grade 1 hardware.
®
The cylindrical lock comes with integrated RX (Request to Exit) and is available in 12 or 24VDC.
The Harmony H1 reader provides visual (LED) and audible indication of lock state (locked/unlocked).
Technical Specifications
3
• Latch – 1/2" standard
3/4" throw fire-rated double doors
(optional) (41- prefix)
• Deadlocking latch
• Outside lever controlled by any 125 kHz HID
proximity credential
Regulatory Specifications
4
12VDC System
• Reader Draw = 150mA
• 12VDC Solenoid Draw = 500mA
• Total System Draw = 650mA
• UL 294 Access Control Performance Ratings:
EAC Regulatory Compliance:
• UL294 6th Edition (Access Control System Units)
• This product meets the requirements of CAN/ULC-S319-05 Equipment Class I
• ANSI/BHMA A156.25 Listed Grade 1 Compliant
Wiring methods shall be in accordance with the National Electrical Code (ANSI/NFPA70), CSA 22.1, Canadian Electrical
Code (CEC), Part I, Safety Standard for Electrical Installations, local codes, and the authorities having jurisdiction.
Harmony Series H1 Cylindrical Lock
• Locks furnished for 1-3/4" doors only
• UL and CUL listed for use on Fire Doors
• Inside lever provides RX signal
• Wire from EAC Panel to door must be shielded with
a drain terminated at EAC Panel controller.
24VDC System
• Reader Draw = 150mA (reader always 12VDC)
• 24VDC Solenoid Draw = 250mA
• Total System Draw = 400mA
Destructive Attack
Line Security
Endurance
Standby Power
3
A7884E • 800-810-WIRE (9473) • www.sargentlock.com
Level I
Level I
Level IV
Level I
Advertisement
