General Description; Specifications; System Overview - Sargent Profile Series Installation Instructions Manual

Profile Series v.N2 Mortise Lock

General Description

2
The SARGENT ® Profile Series v.N2 lock with Aperio™ Technology makes it easy and cost-effective to bring
access control to additional doors. It uses local wireless communication between the lock and an Aperio hub
to connect to an access control system, eliminating the greatest cost and inconvenience of traditional access
control – the wiring at the door. The Profile Series v.N2 includes HID ® iCLASS ® 13.56 MHz smart card tech-
nology, and all technology features are supported by the physical security of SARGENT ANSI/BHMA Grade 1
hardware.
This product is operated by six (6) "AA" alkaline batteries. SARGENT mortise locks are designed with quality
components to provide high security, performance and durability.
The Aperio mortise lock may be used for both indoor and outdoor applications. A weather-protective
gasket is recommended for outdoor applications.

Specifications

3
Lock
• IEEE 802.15.4 UHF interface
• iCLASS technology
• AES 128 bit encryption

System Overview

4
When a user presents a supported credential to
the lock, the Aperio system is designed to send
the credential wirelessly to the Aperio Hub. The
Aperio Hub (wired through RS-485 or Wiegand)
then communicates with an EAC (Electronic
Access Control) system. The EAC system provides
the access decision to the Communication Hub
where access to the lock is either granted or
denied.
! To comply with "Fire Listed" doors, the batteries must be replaced with alkaline batteries only.
Warning: SARGENT Mfg. Co. Profile Series v.N2 locksets utilizing a door position switch (DPS) are not rated for,
or intended for use in life safety applications.
iCLASS Card Requirements
• Supports HID 13.56 MHz iCLASS contactless
credentials (full authentication, all formats)
• ISO14443 standard memory types
Electronic Access
Control System
TCP/IP
1-800-810-WIRE • www.sargentlock.com • A8078A
Access Control Panel
RS-485/Wiegand
Aperio Hub
IEEE 802.15.4
(2.4GHz)
3