Call Progress Tones Section - Cisco WRP500 Administration Manual

Wireless-g broadband router with 2 phone ports and built-in analog telephone adapter
Hide thumbs Also See for WRP500:
Table of Contents

Advertisement

Regional page
R E V I E W D R A F T # 1 — C I S C O C O N F I D E N T I A L
Voice tab > Regional page >

Call Progress Tones section

Dial Tone
Second Dial Tone
Outside Dial Tone
Prompt Tone
Busy Tone
Reorder Tone
Off Hook Warning
Tone
Ring Back Tone
Ring Back 2 Tone
Confirm Tone
Cisco WRP500 Administration Guide
A-14
Prompts the user to enter a phone number. Reorder Tone is played
automatically when Dial Tone or any of its alternatives times out.
The default is 350@-19,440@-19;10(*/0/1+2).
Alternative to the Dial Tone when the user dials a three-way call.
The default is 420@-19,520@-19;10(*/0/1+2).
Alternative to the Dial Tone. It prompts the user to enter an external
phone number, as opposed to an internal extension. It is triggered by
a, (comma) character encountered in the dial plan.
The default is 420@-19;10(*/0/1).
Prompts the user to enter a call forwarding phone number.
The default is 520@-19,620@-19;10(*/0/1+2).
Played when a 486 RSC is received for an outbound call.
The default is 480@-19,620@-19;10(.5/.5/1+2).
Played when an outbound call has failed or after the far end hangs
up during an established call. Reorder Tone is played automatically
when Dial Tone or any of its alternatives times out.
The default is 480@-19,620@-19;10(.25/.25/1+2).
Played when the caller has not properly placed the handset on the
cradle. Off Hook Warning Tone is played when Reorder Tone times
out.
The default is 480@10,620@0;10(.125/.125/1+2).
Played during an outbound call when the far end is ringing.
The default is 440@-19,480@-19;*(2/4/1+2).
Your WRP500 plays this ringback tone instead of Ring Back Tone if
the called party replies with a SIP 182 response without SDP to its
outbound INVITE request. The default value is the same as Ring
Back Tone, except the cadence is 1s on and 1s off.
The default is 440@-19,480@-19;*(1/1/1+2).
Brief tone to notify the user that the last input value has been
accepted.
The default is 600@-16; 1(.25/.25/1).
Appendix A
Advanced Voice Fields

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents