Rtp Parameters Section; Sdp Payload Types Section - Cisco WRP500 Administration Manual

SIP page
R E V I E W D R A F T # 1 — C I S C O C O N F I D E N T I A L
Retry Reg RSC
Voice tab > SIP page >

RTP Parameters section

RTP Port Min
RTP Port Max
RTP Packet Size
Stats In BYE
Voice tab > SIP page >

SDP Payload Types section

NSE Dynamic
Payload
AVT Dynamic
Payload
Cisco WRP500 Administration Guide
A-10
Interval to wait before the WRP500 retries registration after failing
during the last registration.
The default is 30.
Minimum port number for RTP transmission and reception. The RTP
Port Min and RTP Port Max parameters should define a range that
contains at least 4 even number ports, such as 100 – 106.
The default is 16384.
Maximum port number for RTP transmission and reception.
The default is 16482.
Packet size in seconds, which can range from 0.01 to 0.16. Valid
values must be a multiple of 0.01 seconds.
The default is 0.030.
Determines whether the WRP500 includes the P-RTP-Stat header
or response to a BYE message. The header contains the RTP
statistics of the current call. Select yes or no from the drop-down
menu. The format of the P-RTP-Stat header is:
P-RTP-State: PS=<packets sent>,OS=<octets sent>,PR=<packets
received>,OR=<octets received>,PL=<packets lost>,JI=<jitter in
ms>,LA=<delay in ms>,DU=<call duration in
s>,EN=<encoder>,DE=<decoder>.
The default is no.
NSE dynamic payload type. The valid range is 96-127.
The default is 100.
AVT dynamic payload type. The valid range is 96-127.
The default is 101.
Appendix A Advanced Voice Fields