Appendix A
Advanced Voice Fields
R E V I E W D R A F T # 1 — C I S C O C O N F I D E N T I A L
Voice tab > Regional page >
Miscellaneous section
Set Local Date (mm/dd) Sets the local date (mm stands for months and dd stands for days). The
Set Local Time
(HH/mm)
FXS Port Impedance
FXS Port Input Gain
FXS Port Output Gain
DTMF Playback Level
DTMF Playback
Length
DTMF Playback Twist
year is optional and uses two or four digits.
Sets the local time (hh stands for hours and mm stands for minutes).
Seconds are optional.
Sets the electrical impedance of the FXS port. Choices are 600, 900,
600+2.16uF, 900+2.16uF, 270+750||150nF, 220+850||120nF,
220+820||115nF, or 200+600||100nF.
The default is 600.
Input gain in dB, up to three decimal places. The range is 6.000 to
-12.000.
The default is -3.
Output gain in dB, up to three decimal places. The range is 6.000 to
-12.000. The Call Progress Tones and DTMF playback level are not
affected by the FXS Port Output Gain parameter.
The default is -3.
Local DTMF playback level in dBm, up to one decimal place.
The default is -16.0.
Local DTMF playback duration in milliseconds.
The default is .1.
Local DTMF playback duration.
The default is 1.3.
Cisco WRP500 Administration Guide
Regional page
A-27