Nat Support Parameters Section - Cisco WRP500 Administration Manual

Appendix A Advanced Voice Fields
R E V I E W D R A F T # 1 — C I S C O C O N F I D E N T I A L
INFOREQ Dynamic
Payload
NSE Codec Name
AVT Codec Name
G711u Codec Name
G711a Codec Name
G729a Codec Name
G729b Codec Name
G723 Codec Name
EncapRTP Codec
Name
EncapRTP Dynamic
Payload
Voice tab > SIP page >

NAT Support Parameters section

Handle VIA received
INFOREQ dynamic payload type.
There is no default.
NSE codec name used in SDP.
The default is NSE.
AVT codec name used in SDP.
The default is telephone-event.
G.711u codec name used in SDP.
The default is computerMU.
G.711a codec name used in SDP.
The default is computerMA.
G.729a codec name used in SDP.
The default is G729a.
G.729b codec name used in SDP.
The default is G729ab.
G.723 codec name used in SDP.
The default is G723.
EncapRTP codec name used in SDP.
The default is EncapRTP.
EncapRTP dynamic payload type.
If you select yes, the WRP500 processes the received parameter in
the VIA header (this value is inserted by the server in a response to
anyone of its requests). If you select no, the parameter is ignored.
Select yes or no from the drop-down menu.
The default is no.
Cisco WRP500 Administration Guide
SIP page
A-11