Cisco WRP500 Administration Manual page 90

User page
R E V I E W D R A F T # 1 — C I S C O C O N F I D E N T I A L
VMWI Ring Policy
Ring On No New VM If enabled, the WRP500 will play a ring splash when the VM server
Cisco WRP500 Administration Guide
A-46
The parameter controls when a ring splash is played when a the VM
server sends a SIP NOTIFY message to the WRP500 indicating the
status of the subscriber's mail box. 3 settings are available:
• New VM Available—ring as long as there is 1 or more unread voice
mail
• New VM Becomes Available—ring when the number of unread voice
mail changes from 0 to non-zero
• New VM Arrives—ring when the number of unread voice mail
increases.
The default is New VM Available.
sends SIP NOTIFY message to the WRP500 indicating that there
are no more unread voice mails. Some equipment requires a short
ring to precede the FSK signal to turn off VMWI lamp.
The default is no.
Appendix A Advanced Voice Fields