Distinctive Call Waiting Tone Patterns Section; Distinctive Ring/Cwt Pattern Names Section - Cisco WRP500 Administration Manual

Appendix A Advanced Voice Fields
R E V I E W D R A F T # 1 — C I S C O C O N F I D E N T I A L
Voice tab > Regional page >

Distinctive Call Waiting Tone Patterns section

CWT1 Cadence
CWT2 Cadence
CWT3 Cadence
CWT4 Cadence
CWT5 Cadence
CWT6 Cadence
CWT7 Cadence
CWT8 Cadence
Voice tab > Regional page >

Distinctive Ring/CWT Pattern Names section

Ring1 Name
Ring2 Name
Cadence script for distinctive CWT 1.
The default is 30(.3/9.7).
Cadence script for distinctive CWT 2.
The default is 30(.1/.1, .1/9.7).
Cadence script for distinctive CWT 3.
The default is 30(.1/.1, .1/.1, .1/9.3).
Cadence script for distinctive CWT 4.
The default is 30(.1/.1, .3/.1, .1/9.5).
Cadence script for distinctive CWT 5.
The default is 30(.3/.1,.1/.1,.3/9.1).
Cadence script for distinctive CWT 6.
The default is 30(.3/.1,.3/.1,.1/9.1).
Cadence script for distinctive CWT 7.
The default is 30(.1/.1, .3/.1, .1/9.3).
Cadence script for distinctive CWT 8.
The default is 2.3(.3/2).
Name in an INVITE's Alert-Info Header to pick distinctive
ring/CWT 1 for the inbound call.
The default is Bellcore-r1.
Name in an INVITE's Alert-Info Header to pick distinctive
ring/CWT 2 for the inbound call.
The default is Bellcore-r2.
Cisco WRP500 Administration Guide
Regional page
A-17